Adjustable Venturi mask with 6 diluters

Venturi masks are devices that are constructed to supply oxygen or other gases to an individual.  Masks fit snugly over the nose and mouth, and are equipped with oxygen concentration diluter which allows settings of oxygen concentration, and a tube that connects the oxygen mask to a storage tank where the oxygen is contained.  The Venturi mask is made from PVC, as they are light in weight, they are more comfortable than some other masks, increasing patient acceptance. Transparent plastic masks also leave the face visible, allowing care providers to better ascertain patients’ conditions.

Products Details

Venturi masks are devices that are constructed to supply oxygen or other gases to an individual.  Masks fit snugly over the nose and mouth, and are equipped with oxygen concentration diluter which allows settings of oxygen concentration, and a tube that connects the oxygen mask to a storage tank where the oxygen is contained.  The Venturi mask is made from PVC, as they are light in weight, they are more comfortable than some other masks, increasing patient acceptance. Transparent plastic masks also leave the face visible, allowing care providers to better ascertain patients’ conditions. The Venturi mask is made from PVC in medical grade, consists of mask, oxygen tube, Venturi set and connector.-   Pediatric standard -   Pediatric elongated -   Adult standard -   Adult elongated

Item No.

Size

HTA0405

Pediatric standard  

HTA0406

Pediatric elongated 

HTA0407

Adult standard  

HTA0408

Adult elongated 

-   Medical-grade PVC(DEHP or DEHP free available) -   With oxygen supply tubing(2.1m length) -   Concentration of supplied oxygen can be easily adjusted -   Smooth and feathered edge for patient comfort and reducing irritation points -   Sterile by EO, single useNOTE: These instructions are general guidelines intended for use by qualified medical personnel. - Select the appropriate oxygen diluter (green for 24%, 26%,28% or 30%: white for 35%,40% or 50%). - Slip the diluter onto the VENTURI barrel. - Select the prescribed oxygen concentration by setting the indicator on the diluter to the appropriate percentage on the barrel. - Firmly slide the locking ring into position over the diluter. - If humidification is desired, use the high humidity adaptor. To install, match the grooves on the adaptor with the flanges on the diluter and slide firmly into place. Connect the adaptor to the humidity source with large bore tubing (not supplied).  Warning: Use only room air with the high humidity adaptor. Use of oxygen will affect the desired concentration. - Connect supply tubing to the diluter and to the appropriate oxygen source. - Adjust the oxygen flow to the appropriate level(see table below) and check for gas flow through the device.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours